Lab Supervisor Ngô Nhật Tân | ứng viên tìm việc Dệt may tại Đồng Nai

Tên trường: Đại Học Công Nghiệp Tp. Hcm

Giai đoạn: 2001 -2004

Tên khoa: Cao Đẳng

Địa chỉ: Đồng Nai

Ghi chú học tập: Hóa học Công Nghệ - Hữu Cơ

Tên trường: Tập Đoàn Intertek (Its)

Giai đoạn: 2007 -2010

Tên khoa: Kiểm Nghiệm Viên Chuyên Nghiệp

Địa chỉ: Đồng Nai

Ghi chú học tập: Được đào tạo là một Kiểm Nghiệm Viên Chuyên Nghiệp bởi Tập Đoàn Kiểm Nghiệm Intertek (ITS)

Tổ chức: Taekwang-Scavi-Wanek-Dongjin

Giai đoạn: 6.2002 -Present

Hình thức làm việc:

Chuyên môn: Working Experience: 10 Years (From Jun. 2002 ~ Present) Main responsibility, tasks: * Job type: Full time * Most of the time was working in Lab Department, 4 years for staff position and 6 years for supervisor. Main responsibility: Raw Marterial for Testing: Testing Item: Fabric, Leather, Thread, Lace, PU, Soft PU, PU Pucks, IP 001/003/004, IU 002, CMP, Phynol, PVC, Rubber, EVA, Sorcliner… and so on. Folow Nike, Adidas, ASTM, ISO Method -Gauge(mm) Nike G-75 / GE-01 -Yarn Count (2.54 cm) ISO 7211-5-84 -Weight(g/m2) Nike G-46 / GE-07 / ISO 3801 -Bonding Test -Tensile Strength (kg/2.54cm) Nike76 / ST-03 / ASTM D 1682-64 / ISO 13934-2 -Elongation (%) Nike76 / ST-03 / UFS 1979-12 -Tearing Strength Nike G-77 / ST-02 / ASTM D 2261 – 83 / ISO 13937-1 -Seam Strength ST-05 / ASTM D434 / ISO 13936-2 -Mullen Burst(kg/cm2) ASTM D3786 / ISO 13938-2 -Abrasion Stoll (Nike G-12) / Abration resistance ASTM 3885 / EN ISO 12947 -Martindale Abrasion/Sandpaper GE-63 / ASTM D 4157-82 -Crocking (dry/wet) AATCC Test Method 8-1977 / ISO 105 X12 -Colorfastness to wash Nike4 / EN ISO 105C06-A2S&C2S -Color Bleeding Nike G-53 / ISO 105-E04 1996 -MEK Wicking (Nike 49) -Migration Fastness FT-02 -Courtauld Test FT-08 -Sun Tester FT-11 -UV Yellowing (Nike 37) -Nike G#83 pH - Abby Pen -Shrinkage fabric, foams, insole G-1 -Flex, bally coated materials G-11 -Compression set midsole foam G-16 -Split tears foam elastomers G-38 -Specific gravity insole board, foam, rubber, plastic & molded partsG-43 -Ply adhesion, wet/dry fabrics, coated materials, synthetic leather G-44 / ASTM D2724 -Durometer hardness test foam, rubber & plastics G-45 ----------------------------------------------------------------- Main responsibility for Lab Supervisor: - Arrange, establish and management of document system in lab room. - Management of the operation machines in lab-room such as: document, rules of the machine; warranty and calibration program. - Have the plan for using of the raw material, instrument in order to ensure and maintain lab operate. - Information and tackle every problem of the machine from foreign suppliers. - Technical training, to follow and management employees. - Assess working ability of the employee and request to commend and reward. - Summarize the work, sign the laboratory result. - Check and to have work plans at lab-room per week/month/quarter. - Coordinate the work with QA Dept. and departments concern in order to check the raw material and product. - Performing routine QC analysis and assisting in quality improvements. - Troubleshooting analytical equipment and techniques - Assisting in compliance with all legal safety, health and environmental requirements in the lab.